We service most brands of Central Heaters and Furnaces

Click Here to Schedule Service

 

In the quest to find an answer for repairing heating devices, there are several parameters that should be kept in mind. The most effective ways to undertake the household heating repair is either by addressing the sources of the problems or by following the user's guide of the various heating devices. However the user's manual does not provide answers to all the technical problems that might come up in which case it is advisable to consult a professional technician.

 

 

Gas Furnace Repair

 

There can be plenty of reasons responsible for the furnace to not operate properly. Some of the issues can be fixed easily while some others might be hard to gauge. In the event of the furnace not working, no gas supply motor overloading and lighting out of pilot are some of the identifiable causes of the problem. The dirty filter and burner, loose blower belt, an unbalanced system, the clogging of the blowers and the low thermostat settings lead to the reduced heat production within the chambers of the furnace. The furnace can also get incredibly noisy due to the loose blower belts and panels, dirty burner and inadequate lubrication of the motoring parts. Besides, the low setting of the pilot flame, erroneous electric pilot and the faulty thermocouple prevents the pilot from staying lit for prolonged periods. The probable solutions to some of the problems are listed below.

How To Light The Pilot Light On A Gas Heater

 

For the furnaces to operate

• The blown fuses should be identified specially along the circuit breakers and the entrance panels
• The gas valves should be completely open
• The pilot is relighted
• The power switch is turned on and the reset button is pressed

 

To generate adequate heat within the chamber walls of the furnace

• The temperature of the thermostat is set at 41 degrees Fahrenheit.
• The blower assembly is cleaned and the dirty filter is replaced with a new one
• Register openings needs to be checked properly
• The belt should be adjusted accordingly in order to restore the system balance

 

Gas Heater Repair

 

When the heating unit of the gas heater malfunctions, any of its three vital components are affected. The heat source, the thermostat and the distributive system are the origin of the major technical problems for the heater. Sometimes obstruction in the fuel path might prevent it from reaching the engine which can also cause a problem. If the heater initially starts operating but does not make any significant difference to the room temperature the problem lies with the blower systems. Erroneous control of the thermostat results in the repeated turning on and off of the heater. This particular household heating repair involves several necessary steps that should be implemented to fix the technical issues. Some of them are as follows:

 

• Ensure that the electrical power is being continuously transferred to the working unit
• The blown fuses and the damaged circuit breakers need to be repaired / replaced.
• The thermostat temperature should be set at 41 degrees Fahrenheit.

 

Troubleshooting Electric Water Heaters

For more information on our services, please call our certified repair center at 800-734-1557.

 

Industry News, Safety & Recalls

 

 

Repair or Replace?

Replacing the old furnace in your central heating system with a new, more efficient model can offset volatile energy prices. Money aside, today's furnaces pollute less and boost comfort by producing heat more steadily than older furnaces. Gas is the most common heating fuel and this report focuses on gas furnaces. read more...

 

Gas Furnace Safety   |   Appliance Safety   |   Furnace History and Innovations

 

Top Reasons to Choose Airflow Appliance Repair in Greater Los Angeles

Click Here to Schedule Service